Enterasys SecureStack B3

clear logging local
13-10 Logging and Network Management
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thiscommandshowshowtoenableloggingtotheconsoleanddisableloggingtoapersistentfile:
B3(su)->set logging local console enable file disable
clear logging local
Usethiscommandtocleartheconsoleandpersistentstoreloggingforthelocalsession.
Syntax
clear logging local
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearlocallogging:
B3(su)->clear logging local
show logging buffer
Usethiscommandtodisplaythelast256messageslogged.
Syntax
show logging buffer
Parameters
None.
consoleenable|disable Enablesordisablesloggingtotheconsole.
fileenable|disable Enablesordisablesloggingtoapersistentfile.