Enterasys SecureStack B3 User Manual

set class create
9-4 Differentiated Services Configuration
Example
ThisexampleshowshowtodisplayasummaryofDiffservclassinformation.Inthiscase,there
aretwoclassesconfigured,named“guest”and“admin”:
B3(rw)->show diffserv class summary
Class Name Class Type Ref Class Name
----------------- ------------ -------------------------------
guest All
admin All
set class create
UsethiscommandtocreateanewDiffservclass.
Syntax
set diffserv class create {all classname}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateaDiffservclasscalled“admin”: 
B3(rw)->set diffserv class create all admin
set diffserv class delete
UsethiscommandtodeleteaDiffservclassandremoveanymatchassignedtotheclass.
Syntax
set diffserv class delete classname
Parameters
Defaults
None.
all Specifiesthatallmatchconditionsmustbemetbeforetheassociatedpolicy
isexecuted.
classname SpecifiesaclassnameforthisnewDiffservclass.
classname Specifiestheclassnametobedeleted.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English