Enterasys SecureStack B3 User Manual (English)

To Next Page

To Previous Page

set macauthentication

20-22 Security Configuration

Example

ThisexampleshowshowtodisplayMACsessioninformation:

B3(su)->show macauthentication session

Port MAC Address Duration Reauth Period Reauthentications

----- ----------------- ---------- ------------- -----------------

ge.1.2 00:60:97:b5:4c:07 0,00:52:31 3600 disabled

Table 20‐4providesanexplanationofthecommandoutput.

set macauthentication

UsethiscommandtogloballyenableordisableMACauthentication.

Syntax

set macauthentication {enable | disable}

Parameters

Mode

Switchcommand,read‐write.

Defaults

None.

Example

ThisexampleshowshowtogloballyenableMACauthentication:

B3(su)->set macauthentication enable

set macauthentication password

UsethiscommandtosetaMACauthenticationpassword.

Table 20-4 show macauthentication session Output Details

Output What It Displays...

Port Port designation. For a detailed description of possible port-string values, refer to

“Port String Syntax Used in the CLI” on page 5-1.

MAC Address MAC address associated with the session.

Duration Time this session has been active.

Reauth Period Reauthentication period for this port, set using the set macauthentication

reauthperiod command described in “set macauthentication reauthperiod” on

page 20-28.

Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set

macauthentication reauthentication command described in “set

macauthentication reauthentication” on page 20-26.

enable|disable GloballyenablesordisablesMACauthentication.

Need help?

Do you have a question about the Enterasys SecureStack B3 and is the answer not in the manual?

Enterasys SecureStack B3 Specifications

General