Enterasys SecureStack B3 User Manual

set sntp poll-retry
13-30 Logging and Network Management
set sntp poll-retry
UsethiscommandtosetthenumberofpollretriestoaunicastSNTPserver.
Syntax
set sntp poll-retry retry
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthenumberofSNTPpollretriesto5:
B3(su)->set sntp poll-retry 5
clear sntp poll-retry
UsethiscommandtoclearthenumberofpollretriestoaunicastSNTPserver.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthenumberofSNTPpollretries:
B3(su)->clear sntp poll-retry
retry Specifies thenum berofretries.Validvaluesare0to10.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English