Enterasys SecureStack B3 User Manual

set linkflap globalstate
5-22 Port Configuration
Thisexampleshowshowtodisplaythelinkflapmetricstable:
B3(rw)->show linkflap metrics
Port LinkStatus CurrentCount TotalCount TimeElapsed Violations
-------- ----------- ------------ ---------- ----------- -------------
ge.1.1 operational 0 0 241437 0
ge.1.2 disabled 4 15 147 5
ge.1.3 operational 3 3 241402 0
Table 5‐4providesanexplanationoftheshowlinkflapmetricscommandoutput.
set linkflap globalstate
Usethiscommandtogloballyenableordisablethelinkflapdetectionfunction.
Syntax
set linkflap globalstate {disable | enable}
Parameters
Defaults
Bydefault,thefunctionisdisabledgloballyandonallports.
Mode
Switchmode,read‐write.
Usage
Bydefault,thefunctionisdisabledgloballyandonallports.Ifdisabledgloballyafterper‐port
settingshavebeenconfiguredusingthelinkflapcommands,per‐portsettingswillberetained.
Example
Thisexampleshowshowtogloballyenablethelinktrapdetectionfunction.
B3(rw)->set linkflap globalstate enable
Table 5-4 show linkflap metrics Output Details
Output... What it displays...
Port Port designation.
LinkStatus Link status according to the link flap function.
CurrentCount Link down count accruing toward the link flap threshold.
TotalCount Number of link downs since system start,
TimeElapsed Time (in seconds) since the last link down event.
Violations Number of link flap violations on listed ports since system start.
disable|enable Globallydisablesorenablesthelinkflapdetectionfunction.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English