Enterasys SecureStack B3

set pwa initialize
SecureStack B3 Configuration Guide 20-65
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
PWAwilluseaguestpasswordandguestusernametograntnetworkaccesswithdefaultpolicy
privilegestouserswithoutestablishedloginnamesandpasswords.
Example
ThisexampleshowshowtoenablePWAguestnetworkingwithRADIUSauthentication:
B3(su)->set pwa guestnetworking authradius
set pwa initialize
UsethiscommandtoinitializeaPWAporttoitsdefaultunauthenticatedstate.
Syntax
set pwa initialize [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,allportswillbeinitialized.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoinitializeportsge.1.5‐7:
B3(su)->set pwa initialize ge.1.5-7
authnone Enablesguestnetworkingwithnoauthentica tionmethod.
authradius EnablesguestnetworkingwithRADIUSauthentication.Uponsuccessful
authenticationfromRADIUS,PWAwillapplythepolicyreturnedfrom
RADIUStothePWAport.
disable Disablesguestnetworking.
port‐string (Optional)Initializesspecificport(s).Foradetaileddescriptionofpossible
port‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on
page 5‐1.