To Next Page

To Previous Page

set igmpsnooping adminmode

SecureStack B3 Configuration Guide 12-3

thesystem,referto“setigmpsnoopingadminmode”onpage 12‐3.Forinformationonenabling

IGMPononeormoreports,referto“setigmpsnoopinginterfacemode”onpage 12‐3.

Example

ThisexampleshowshowtodisplayIGMPsnoopinginformation:

B3(su)->show igmpsnooping

Admin Mode..................................... Enable

Group Membership Interval...................... 260

Max Response Time.............................. 100

Multicast Router Present Expiration Time....... 0

Interfaces Enabled for IGMP Snooping........... ge.1.1,ge.1.2,ge.1.3

Multicast Control Frame Count..................0

Data Frames Forwarded by the CPU...............0

set igmpsnooping adminmode

UsethiscommandtoenableordisableIGMPonthesystem.

Syntax

set igmpsnooping adminmode {enable | disable}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

InorderforIGMPsnoopingtobeenabledononeorallports,itmustbegloballyenabledonthe

devicewiththiscommand,andthenenabledonaport(s)usingthesetigmpsnoopinginterface

modecommandasdescribedin“setigmpsnoopinginterfacemode”onpage 12‐3.

Example

ThisexampleshowshowtoenableIGMPonthesystem:

B3(su)->set igmpsnooping adminmode enable

set igmpsnooping interfacemode

UsethiscommandtoenableordisableIGMPononeorallports.

Syntax

set igmpsnooping interfacemode port-string {enable | disable}

enable|disable EnablesordisablesIGMPsnoopingonthesystem.

Enterasys SecureStack B3 User Manual

Questions and Answers: