Enterasys SecureStack B3

clear cos all-entries
SecureStack B3 Configuration Guide 10-31
clear cos all-entries
UsethiscommandtoclearallClassofServiceentriesexceptentries0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSconfigurationforallentriesexceptentries0‐7:
B3(su)->clear cos all-entries
show cos port-type
UsethiscommandtodisplayClassofServiceporttypeconfigurations.
Syntax
show cos port-type [irl [port-type]]
Parameters
Defaults
Ifnoparametersarespecified,inboundratelimitinginformationforallporttypesisdisplayed.
Mode
Switchcommand,read‐only.
Usage
TheB3implementationprovidesonedefaultporttype(0)fordesignatingavailableinboundrate
limitingresources.Porttype0includesallports.
Theporttype0descriptionis“B3100IRL,”whichindicatesthatthisporttypeprovidesa
maximumof100inboundratelimitingresourcesperportgroup.
Example
Thisexampleshowsinboundrateli mitinginformationforporttype0.
irl (Optional)Displaysinboundratelimitinginformation.
port‐type (Optional)Displaysinformationforaspecificporttype.