Enterasys SecureStack B3

clear multiauth precedence
20-34 Security Configuration
clear multiauth precedence
Usethiscommandtoclearthesystem’smultipleauthenticationadministrativeprecedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthemultipleauthenticationprecedence:
B3(rw)->clear multiauth precedence
show multiauth port
Usethiscommandtodisplaymultipleauthenticationpropertiesforoneormoreports.
Syntax
show multiauth port [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,multipleauthentication informationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationinformationforportsge.3.1‐4:
B3(rw)->show multiauth port ge.3.1-4
Port Mode Max Allowed Current
users users users
------------ ------------ ---------- ---------- ----------
ge.3.1 auth-opt 2 8 0
ge.3.2 auth-opt 2 8 0
ge.3.3 auth-opt 2 8 0
ge.3.4 auth-opt 2 8 0
port‐string (Optional)Displaysmultipleauthenticationinformationforspecificport(s).