Enterasys SecureStack B3

set cos port-resource
SecureStack B3 Configuration Guide 10-25
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thedefaultportgroup0.0cannotbedeleted.
Example
ThisexampledeletesallPortGroupsexcept fortheDefaultgroup0.0:
B3(su)->clear cos port-config irl all
set cos port-resource
UsethiscommandtosettheinboundratelimitparametersforaspecificIRLresourceforaspecific
portgroup.
Syntax
set cos port-resource irl group-type-index irl-index {[unit {kbps}] [rate rate]
[type {drop}]}
Parameters
irl ClearanIRLportgroupconfiguration.
all Clearallinboundratelimitingport‐confignon‐defaultentries.
group‐type‐index Deleteaspecificportgrouporgroupname,orcleartheportsfromthat
group.Validentriesareintheformofgroup#.port‐type.
Validvaluesforgroup#canrangefrom0
to7.Validvaluesforport‐type
canrangefrom0to1,althoughonlyporttype0iscurrentlysupported.
Forexample,portgroup3wouldbespecifiedas3.0.
entry Deletethisnon‐defaultinboundratelimiterentry.
name Cleartheadministrativelyassignedtextualdescriptionofthisportgroup
entrytoitsdefault.
ports Cleartheportsassignedtothisgrouptoitsdefault.
irl SetanIRLportresource.
group‐type‐index Specifiesaninboundratelimitingportgroup/typeindex.Validentriesare
intheformofgroup#.port‐type.
Validvaluesforgroup#canrangefrom0to7.Validvaluesforport‐type
canrangefrom0to1,althoughonlyporttype0
iscurrentlysupported.
Forexample,portgroup3wouldbespecifiedas3.0.
irl‐index Indexnumberoftheinboundratelimiterresourceassociatedwiththis
entry.Validvaluesrangefrom0to99.
unit Unitofmeasurefortheinboundratelimiter(onlyoptionisKbps).