Enterasys SecureStack B3

set igmpsnooping add-static
12-6 IGMP Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thistimerisforexpiringtheswitchfromthemulticastdatabase.Ifthetimerexpires,andtheonly
addressleftisthemulticastswitch,thentheentrywillberemoved.
Example
ThisexampleshowshowtosettheIGMPmulticastrouterexpirationtimetoinfinity:
B3(su)->set igmpsnooping mcrtrexpiretime 0
set igmpsnooping add-static
ThiscommandcreatesanewstaticIGMPentryoraddsoneormorenewportstoanexisting
entry.
Syntax
set igmpsnooping add-static group vlan-list [modify] [port-string]
Parameters
Defaults
Ifnoportsarespecified,allportsareaddedtotheentry.
Ifmodifyisnotspecified,anewentryiscreated.
Mode
Switchcommand,read‐write.
Usage
UsethiscommandtocreateandconfigureLayer2IGMPentries.
Example
ThisexamplecreatesanIGMPentryforthemulticastgroupwithIPaddressof233.11.22.33
configuredonVLAN20configuredwiththeport
ge.1.1.
B3(su)->set igmpsnooping add-static 233.11.22.33 20 ge.1.1
group SpecifiesthemulticastgroupIPaddressfortheentry.
vlan‐list SpecifiestheVLANsonwhichtoconfiguretheentry.
modify (Optional)Addsthespecifiedportorportstoanexistingentry.
port‐string (Optional)Specifiestheportorportstoaddtotheentry.