Enterasys SecureStack B3

clear radius
SecureStack B3 Configuration Guide 20-7
clear radius
UsethiscommandtoclearRADIUSserversettings.
Syntax
clear radius [retries] | [timeout] | [server {index | all | realm {index | all}}]
Parameters
Mode
Switchcommand,read‐write.
Defaults
None.
Examples
ThisexampleshowshowtoclearallsettingsonallRADIUSservers:
B3(su)->clear radius server all
ThisexampleshowshowtoresettheRADI US timeouttothedefaultvalueof20seconds:
B3(su)->clear radius timeout
show radius accounting
UsethiscommandtodisplaytheRADIUSaccountingconfiguration.Thistransmitsaccounting
informationbetweenanetworkaccessserverandasharedaccountingserver.
Syntax
show radius accounting [server] | [counter ip-address] | [retries] | [timeout]
Parameters
retries ResetsthemaximumnumberofattemptsausercancontacttheRADIUS
serverbeforetimingoutto3.
timeout ResetsthemaximumamountoftimetoestablishcontactwiththeRADIUS
serverbeforetimingoutto20seconds.
server Deletesserversettings.
index|all Forusewiththeserverparameter
tocleartheserverconfigurationforall
serversoraspecificRADIUSserverasdefinedbyanindex.
realm ResetstherealmsettingforallserversoraspecificRADIUSserveras
definedbyanindex.
server (Optional)DisplaysoneorallRADIUS accountingserverconfigurations.
counterip‐address (Optional)DisplayscountersforaRADIUSaccountingserver.
retries (Optional)Displaysthemaximumnumberofattemptstocontactthe
RADIUSaccountingserverbeforetimingout.
timeout (Optional)Displaysthemaximumamountoftimebeforetimingout.