show system login
3-2 Basic Configuration
show system login
Usethiscommandtodisplayuserloginaccount information.
Syntax
show system login
Parameters
None.
Defaults
None.
Mode
Switchcommand,superuser.
Example
Thisexampleshowshowtodisplayloginaccountinformation.Inthiscase,switchdefaultshave
notbeenchanged:
B3(su)->show system login
Password history size: 0
Password aging : disabled
Username Access State
admin super-user enabled
ro read-only enabled
rw read-write enabled
Table 3‐1providesanexplanationofthecommandoutput.
set system password length 3-5
set system password aging 3-5
set system password history 3-6
show system lockout 3-6
set system lockout 3-7
For information about... Refer to page...
Table 3-1 show system login Output Details
Output What It Displays...
Password history size Number of previously used user login passwords that will be checked for
duplication when the set password command is executed. Configured with set
system password history (page 3-6).
Password aging Number of days user passwords will remain valid before aging out. Configured
with set system password aging (page 3-5).
Username Login user names.
To Next Page
Loading...
Need help?
General