Enterasys SecureStack B3

set ssh hostkey
20-70 Security Configuration
Syntax
set ssh {enable | disable | reinitialize}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableSSH:
B3(su)->set ssh disable
set ssh hostkey
UsethiscommandtosetorreinitializenewSSHauthenticationkeys.
Syntax
set ssh hostkey [reinitialize]
Parameters
Defaults
Ifreinitializeisnotspecified,theusermustsupplySSHauthenticationkeyvalues.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoregenerateSSHkeys:
B3(su)->set ssh hostkey reinitialize
enable|disable EnablesordisablesSSH,orreinitializestheSSHserver.
reinitialize Reinitializesthe SSHserver.
reinitialize (Optional)Reinitializestheserverhostauthenticationkeys.