Enterasys SecureStack B3 User Manual

clear mac algorithm
13-22 Logging and Network Management
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowstheoutputofthiscommand.
B3(su)->show mac algorithm
Mac hashing algorithm is mac-crc16-upperbits.
clear mac algorithm
UsethiscommandtoreturntheMAChashingalgorithmtothedefaultvalueofmac‐crc16‐
upperbits.
Syntax
clear mac algorithm
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleresetstheMAChashingalgorithmtothedefaultvalue.
B3(su)->clear mac algorithm
set mac multicast
UsethiscommandtodefineonwhatportswithinaVLANamu lticastaddresscanbedynamically
learnedon,oronwhatportsaframewiththespecif iedMACaddresscanbeflooded.Also,use
thiscommandtoappendportstoorclearports fromtheegressportslist.
Syntax
set mac multicast mac-address vlan-id [port-string] [{append | clear} port-string]

Enterasys SecureStack B3 Specifications

General

Ports	24 or 48 10/100/1000BASE-T ports
Forwarding Rate	95.2 Mpps
Layer	Layer 2/3
Power Supply	Internal
Redundant Power Supply	Optional
VLANs Supported	4094
Uplink Ports	4 SFP ports
Dimensions	44.0 x 43.7 x 4.4 cm
Weight	11.9 lbs (5.4 kg)
MAC Address Table Size	16, 000 entries
Jumbo Frame Support	Up to 9, 216 bytes
Power over Ethernet	PoE+
Operating Temperature	0°C to 50°C
Storage Temperature	-20 °C to 70 °C
Humidity	10% to 95% (non-condensing)