Enterasys SecureStack B3 User Manual

clear policy all-rules
10-14 Policy Classification Configuration
clear policy all-rules
Usethiscommandtoremoveallpolicyclassificationrules.
Syntax
clear policy all-rules
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoremovealladministrativeandpolicyinde x rules:
B3(su)->clear policy all-rules
Assigning Ports to Policy Profiles
Purpose
Toassignandunassignportstopolicyprofiles.
Commands
set policy port
Usethiscommandtoassignportstoapolicyprofile.
Syntax
set policy port port-string profile-index
Note: The B3 switch supports up to eight user policies per port.
For information about... Refer to page...
set policy port 10-14
clear policy port 10-15

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English