Enterasys SecureStack B3 User Manual

show policy rule
SecureStack B3 Configuration Guide 10-7
Defaults
Ifverboseisnotspecified,summaryinformationwillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaypolicyclassificationinformationforEthernettype2rules
B3(su)->show policy rule ether
|PID |Rule Type |Rule Data |Mk|PortStr |RS|ST|VLAN|CoS |U|
|02 |Ether |2048 (0x0800) |16|All | A|NV|fwrd| |?|
|02 |Ether |2049 (0x0801) |16|All | A|NV|drop| |?|
|02 |Ether |2989 (0x0bad) |16|All | A|NV|drop| |?|
|02 |Ether |33079 (0x8137) |16|All | A|NV|drop| |?|
Thisexampleshowshowtodisplaypolicyclassificationinformationforadministrativerule1
B3(su)->show policy rule admin-pid 1
|Admin|Rule Type |Rule Data |Mk|PortStr |RS|ST|dPID|aPID|U|
|admin|Port |ge.1.1 |16|ge.1.1 | A|NV| | 1|?|
|admin|Port |ge.1.2 |16|ge.1.2 | A|NV| | 1|?|
|admin|Port |ge.1.3 |16|ge.1.3 | A|NV| | 1|?|
|admin|Port |ge.1.4 |16|ge.1.4 | A|NV| | 1|?|
|admin|Port |ge.1.5 |16|ge.1.5 | A|NV| | 1|?|
|admin|Port |ge.1.6 |16|ge.1.6 | A|NV| | 1|?|
|admin|Port |ge.1.7 |16|ge.1.7 | A|NV| | 1|?|
|admin|Port |ge.1.8 |16|ge.1.8 | A|NV| | 1|?|
|admin|Port |ge.1.9 |16|ge.1.9 | A|NV| | 1|?|
|admin|Port |ge.1.10 |16|ge.1.10 | A|NV| | 1|?|
|admin|Port |ge.1.11 |16|ge.1.11 | A|NV| | 1|?|
|admin|Port |ge.1.12 |16|ge.1.12 | A|NV| | 1|?|
Table 10‐2providesanexplanationofthecommandoutput.
usage‐list (Optional)Ifselected,eachruleʹsusage‐listshallbecheckedandshall
displayonlythoseportswhichhaveappliedthisrule.
display‐if‐used (Optional)Displaysrule(s)onlyiftheyareappliedtoatleastoneport.
Table 10-2 show policy rule Output Details
Output What It Displays...
PID Profile index number. Assigned to this classification rule with the set policy profile
command (“set policy profile” on page 10-3).
Rule Type Type of classification rule. Refer to Table 10-3 for valid types.
Rule Data Rule data value. Refer to Table 10-3 for valid values for each classification type.
Mk Rule data mask. Refer to Table 10-3 for valid values for each classification data
value.
PortStr Ingress port(s) to which this rule applies.
RS Whether or not the status of this rule is active (A), not in service or not ready.
ST Whether or not this rule’s storage type is non-volatile (NV) or volatile (V).
VLAN VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English