Enterasys SecureStack B3 - Clear Maclock Firstarrival; Set Maclock Agefirstarrival

clear maclock firstarrival
20-54 Security Configuration
B3(su)->set maclock firstarrival ge.2.3 6
clear maclock firstarrival
UsethiscommandtoresetthenumberoffirstarrivalMACaddressesallowedperporttothe
defaultvalueof600.
Syntax
clear maclock firstarrival port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetMACfirstarrivalsonge.2.3:
B3(su)->clear maclock firstarrival ge.2.3
set maclock agefirstarrival
UsethiscommandtoenableordisabletheagingoffirstarrivalMACaddresses.Whenenabled,
firstarrivalMACaddressesthatareagedoutoftheforwardingdatabasewillberemovedfrom
theassociatedportMAClock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switchmode,read‐write.
port‐string Specifiestheportonwhichtoresetthefirstarrivalvalue.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 5 ‐1.
port‐string Specifiestheport(s)onwhichtoenableordisablefirstarrivalaging.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 5‐1.
enable|disable Enableordisablefirstarrivalaging.Bydefault,firstarrivalagingis
disabled.