Enterasys SecureStack B3 User Manual

clear pwa banner
SecureStack B3 Configuration Guide 20-61
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthePWAloginbannerto“WelcometoEnterasysNetworks”:
B3(su)->set pwa banner “Welcome to Enterasys Networks”
clear pwa banner
UsethiscommandtoresetthePWAloginbannertoablankstring.
Syntax
clear pwa banner
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetthePWAloginbannertoablankstring
B3(su)->clear pwa banner
set pwa displaylogo
UsethiscommandtosetthedisplayoptionsfortheEnterasysNetworkslogo.
Syntax
set pwa displaylogo {display | hide}
Parameters
string SpecifiesthePWAloginbanner.
display|hide DisplaysorhidestheEnterasysNetworkslogowhenthePWAwebsite
displays.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English