To Next Page

To Previous Page

set system enhancedbuffermode

3-14 Basic Configuration

Examples

Thisexampleshowshowtodisplaythesystem’sCPUutilization:

B3(ro)->show system utilization cpu

Total CPU Utilization:

Switch CPU 5 sec 1 min 5 min

-----------------------------------------------

1 1 3% 1% 1%

Thisexampleshowshowtodisplaythesystem’soverallmemoryusage:

B3(ro)->show system utilization storage

Storage Utilization:

Type Description Size(Kb) Available (Kb)

---------------------------------------------------------------

RAM RAM device 262144 97173

Flash Images, Config, Other 31095 8094

Thisexampleshowshowtodisplayinformationabouttheprocessesrunningonthesystem.Only

partialoutputisshown.

B3(ro)->show system utilization process

TID Name 5Sec 1Min 5Min

8d45148 captureTask 0.00% 0.00% 0.00%

8e264f8 poe_monitor 0.00% 0.01% 0.05%

8ea6d38 poe_read 0.80% 0.22% 0.20%

8eb7140 vlanDynEg 0.00% 0.00% 0.00%

8f0be10 tcdpSendTask 0.00% 0.00% 0.00%

8f1c0e8 tcdpTask 0.00% 0.00% 0.00%

set system enhancedbuffermode

Usethiscommandtoenableordisableenhancedbuffermode,whichoptimizesbuffer

distributionfornon‐stackingsingleCoSqueueoperation.Executingthiscommandwillresetthe

switch,sothesystempromptsyoutoconfirmwhetheryouwanttoproceed.

Syntax

set system enhancedbuffermode {enable | disable}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

enable|disable Enablesordisablesenhancedbuffermode.

Enterasys SecureStack B3 User Manual

Questions and Answers: