Enterasys SecureStack B3

show diffserv class
SecureStack B3 Configuration Guide 9-3
Syntax
show diffserv info
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaygeneralDiffservstatusinformation:
B3(rw)->show diffserv info
DiffServ Admin Mode............................ Enable
Class Table Size Current/Max................... 0 / 25
Class Rule Table Size Current/Max.............. 0 / 150
Policy Table Size Current/Max.................. 0 / 12
Policy Instance Table Size Current/Max......... 0 / 120
Policy Attribute Table Size Current/Max........ 0 / 120
Service Table Size Current/Max................. 0 / 48
show diffserv class
UsethiscommandtodisplayinformationaboutDiffservclasses.
Syntax
show diffserv class {summary | detailed classname}
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
summary DisplaysasummaryofDiffservclassinformation.
detailedclassname DisplaysdetailedDiffservinformationforaspecificclass.