Enterasys SecureStack B3 User Manual

clear logging server
13-4 Logging and Network Management
clear logging server
UsethiscommandtoremoveaserverfromtheSyslogservertable.
Syntax
clear logging server index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThiscommandshowshowtoremovetheSyslogserverwithindex1fromtheservertable:
B3(su)->clear logging server 1
show logging default
UsethiscommandtodisplaytheSyslogserverdefaultvalues.
Syntax
show logging default
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThiscommandshowshowtodisplaytheSyslogserverdefaultvalues.Foranexplanationofthe
commandoutput,referbacktoTable 13‐1onpage 13‐2.
B3(su)->show logging default
Facility Severity Port
-----------------------------------------
Defaults: local4 warning(5) 514
index Specifiestheservertableindexnumberforthe servertoberemoved.
Validvaluesare1‐8.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English