Enterasys SecureStack B3 - Clear Vlanauthorization; Set Vlanauthorization Egress

set vlanauthorization egress
20-44 Security Configuration
B3(rw)-> set vlanauthorization disable ge.3.*
set vlanauthorization egress
ControlsthemodificationofthecurrentVLANegresslistof802.1xauthenticatedportsforthe
VLANsreturnedintheRADIUSauthorizationfilteridstring.
Syntax
set vlanauthorization egress {none | tagged | untagged} port-string
Parameters
Defaults
Bydefault,administrativeegressissettountagged.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenabletheinsertionoftheRADIUSassignedVLANtoan802.1qtag
foralloutboundframesforports10through15onunit/modulenumber3.
B3(rw)->set vlanauthorization egress tagged ge.3.10-15
clear vlanauthorization
Usethiscommandtoreturnport(s)tothedefaultconfigurationofVLANauthorizationdisabled,
egressuntagged.
Syntax
clear vlanauthorization [port-string]
Parameters
none Specifiesthatnoegressmanipulationwillbemade.
tagged Specifiesthattheauthenticatingportwillbeaddedtothecurrenttagged
egressfortheVLAN‐IDreturned.
untagged Specifiesthattheauthenticatingportwillbeaddedtothecurrent
untaggedegressfortheVLAN‐IDreturned(default).
port‐string Specifiesthattheport
orlistofports.towhichthiscommandwillapply.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 5‐1.
port‐string (Optional)Specifieswhichportsaretoberestoredtodefault
configuration.Ifnoportstringisentered,theactionwillbeaglobal
setting.Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 5‐1.