Enterasys SecureStack B3 User Manual

clear policy profile
SecureStack B3 Configuration Guide 10-5
clear policy profile
Usethiscommandtodeleteapolicyprofileentry.
Syntax
clear policy profile profile-index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtodeletepolicyprofile8:
B3(su)->clear policy profile 8
Configuring Classification Rules
Purpose
Toreview,create,assign,andunassignclassificationrulestopolicyprofiles.Thismapsuser
profilestoprotocol‐basedframefilteringpolicies.
Commands
show policy rule
Usethiscommandtodisplaypolicyclassificationruleinformation.
profile‐index Specifiestheindexnumberoftheprofileentrytobedeleted.Validvalues
are1to255.
Note: B3, C3, and G3 devices support profile-based CoS traffic rate limiting only. Policy rules
specifying CoS will not rate limit on these devices, or on mixed stacks including B3 or C3 devices.
For information about... Refer to page...
show policy rule 10-5
show policy capability 10-8
set policy rule 10-9
clear policy rule 10-12
clear policy all-rules 10-14

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English