Enterasys SecureStack B3

clear spantree msti
SecureStack B3 Configuration Guide 7-13
clear spantree msti
UsethiscommandtodeleteoneormoreMultipleSpanningTreeinstances.
Syntax
clear spantree msti [sid sid]
Parameters
Defaults
Ifsidisnotspecified,allMSTinstanceswillbecleared.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodeleteallMSTinstances:
B3(su)->clear spantree msti
show spantree mstmap
UsethiscommandtodisplaythemappingofafilteringdatabaseID(FID)toaSpanningTrees.
SinceVLANsaremappedtoFIDs,thisshowstowhichSIDaVLANismapped.
Syntax
show spantree mstmap [fid fid]
Parameters
Defaults
Iffidisnotspecified ,informationforallassignedFIDswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySIDtoFIDmappinginformationforFID1.Inthiscase,no
newmappingshavebeenconfigured:
B3(su)->show spantree mstmap fid 1
FID: SID:
1 0
sidsid (Optional)DeletesaspecificmultipleSpanningTreeID.
fidfid (Optional)DisplaysinformationforspecificFIDs.