Enterasys SecureStack B3 User Manual

clear lacp
5-40 Port Configuration
Example
ThisexampleshowshowtosettheLACPadminkeyto2000forLAGport6:
B3(su)->set lacp aadminkey lag.0.6 2000
clear lacp
UsethiscommandtoclearLACPsystempriorityoradminkeysettings.
Syntax
clear lacp {[asyspri] [aadminkey port-string]}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocleartheactor adminkeyforLAGport6:
B3(su)->clear lacp aadminkey lag.0.6
set lacp static
Usethiscommandtodisableorenablestaticlinkaggregation,ortoassignoneormoreunderlying
physicalportstoaLinkAggregationGroup(LAG).
Syntax
set lacp static {disable | enable} | lagportstring [key] port-string
Parameters
asyspri Clearssystem priority.
aadminkeyport‐string Resetsadminkeysforoneormoreportstothedefaultvalueof32768.
disable|enable Disablesorenablesstaticlinkaggregation.
lagportstring SpecifiestheLAGaggregatorporttowhichnewportswillbeassigned.
key (Optional)Specif iesthenewmemberportandLAGportaggregator
adminkeyvalue.Onlyportswithmatchingkeysareallowedto
aggregate.Validvaluesare0‐65535.
Note: This key value must be unique. If ports other than the desired
underlying physical ports share the same admin key value, aggregation
will fail or undesired aggregations will form.
port‐string Specifiesthememberport(s)toaddtotheLAG.For adetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage5‐1.

Enterasys SecureStack B3 Specifications

General

Brand	Enterasys
Model	SecureStack B3
Category	Switch
Language	English