Enterasys SecureStack B3

set maclock disable
20-50 Security Configuration
MAClockingisdisabledbydefaultatdevicestartup.ConfiguringoneormoreportsforMAC
lockingrequiresgloballyenablingitonthedeviceandthenenablingitonthedesiredports.
Example
ThisexampleshowshowtoenableMAClockingonge.2.3:
B3(su)->set maclock enable ge.2.3
set maclock disable
UsethiscommandtodisableMAClockinggloballyorononeormoreports.
Syntax
set maclock disable [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingwillbedisabledgl oballyonthestackorstandalone
device.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableMAClockingonge.2.3:
B3(su)->set maclock disable ge.2.3
set maclock
UsethiscommandtocreateastaticMACaddress‐to‐portlocking,andtoenableordisableMAC
lockingforthespecifiedMACaddressandport.
Syntax
set maclock mac-address port-string {create | enable | disable}
port‐string (Optional)DisablesMAClockingonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 5 ‐1.