Enterasys SecureStack B3

set prompt
SecureStack B3 Configuration Guide 3-19
Example
Thisexampleshowshowtoclearthedaylightsaving stimeconfiguration:
B3(su)->clear summertime
set prompt
Usethiscommandtomodifythecommandprompt.
Syntax
set prompt prompt_string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthecommandprompttoSwitch1:
B3(su)->set prompt “Switch 1”
Switch 1(su)->
show banner motd
Usethiscommandtoshowthebannermessageofthedaytha twilldisplayatsessionlogin.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
prompt_string Specifiesatextstringforthecommandprompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.