Enterasys SecureStack B3

show time
SecureStack B3 Configuration Guide 3-15
Example
Thisexampleshowshowtoenableenhancedbuffermode:
B3(su)->set system enhancedbuffermode enable
Changes in the enhanced buffer mode will require resetting this unit.
Are you sure you want to continue? (y/n)
show time
Usethiscommandtodisplaythecurrenttimeofdayinthesystemclock.
Syntax
show time
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythecurrenttime.Theoutputshowsthedayoftheweek,
month,day,andthetimeofdayinhours,minutes,andsecondsandtheyear:
B3(su)->show time
THU SEP 05 09:21:57 2002
set time
Usethiscommandtochangethetimeofdayonthesystemclock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
Defaults
None.
[mm/dd/yyyy]
[hh:mm:ss]
Setsthetimein:
month,day,yearand/or
24‐hourformat
Atleastonesetoftimeparametersmustbeentered.