Enterasys SecureStack B3

show dhcp pool configuration
15-28 DHCP Server Configuration
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleremovesoption19fromaddresspool“auto1.”
B3(rw)->clear dhcp pool auto1 option 19
show dhcp pool configuration
Usethiscommandtodisplayconfigurationinformationforoneoralladdresspools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
Defaults
None.
Mode
Read‐only.
Example
Thisexampledisplaysconfigurationinformationforalladdresspools.
B3(rw)->show dhcp pool configuration all
Pool: Atg_Pool
Pool Type Dynamic
Network 192.0.0.0 255.255.255.0
Lease Time 1 days 0 hrs 0 mins
Default Routers 192.0.0.1
Pool: static1
Pool Type Manual
Client Name appsvr1
Client Identifier 01:00:01:f4:01:27:10
Host 10.1.1.1 255.0.0.0
poolname Specif iesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
code SpecifiestheDHCPoptioncode,asdefinedinRFC2132.Valuecanrange
from1to254.
poolname Specif iesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.