Enterasys SecureStack B3

show ipv6 netstat
SecureStack B3 Configuration Guide 19-7
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowsexampleoutputofthiscommand.
B3(su)->show ipv6 neighbors
Last
IPv6 Address MAC Address isRtr State Updated
--------------------------------------- ----------------- ----- ------- -------
2001:db8:1234:6666::2310:3 00:04:76:73:42:31 True Reachable 00:01:16
show ipv6 netstat
UsethiscommandtodisplayIPv6netstatinformation.
Syntax
show ipv6 netstat
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowstheoutputofthiscommand.
B3(su)->show ipv6 netstat
Prot Local Address State
Foreign Address
---- -------------------------------------------- -----------
TCP 3333::211:88FF:FE59:4424.22 ESTABLISHED
2020::D480:1384:F58C:B114.1049
TCP 3333::211:88FF:FE59:4424.443 TIME_WAIT
2020::D480:1384:F58C:B114.1056
TCP ::.23 LISTEN
::.*
TCP 3333::211:88FF:FE59:4424.22 ESTABLISHED
2020::D480:1384:F58C:B114.1050
TCP 3333::211:88FF:FE59:4424.22 ESTABLISHED
3333::2117:F1C0:90B:910D.1045
TCP ::.80 LISTEN
::.*
TCP ::.22 LISTEN
::.*
TCP 3333::211:88FF:FE59:4424.80 ESTABLISHED