Enterasys SecureStack B3

clear ipv6 gateway
19-6 IPv6 Management
Example
ThisexampleshowshowtoconfigureanIPv6gatewayaddressusingalink‐localaddress.
B3(su)->set ipv6 gateway fe80::201:f4ff:fe5d:1234
B3(su)->show ipv6 address
Name IPv6 Address
------------ ----------------------------------------
host FE80::201:F4FF:FE5C:2880/64
gateway FE80::201:F4FF:FE5D:1234
clear ipv6 gateway
UsethiscommandtoclearanIPv6gatewayaddress.
Syntax
clear ipv6 gateway
Parameters
None.
Defaults
None.
Mode
Switchmode,read‐write.
Example
ThisexampleshowshowtoremoveaconfiguredIPv6gatewayaddress.
B3(su)->show ipv6 address
Name IPv6 Address
------------ ----------------------------------------
host FE80::201:F4FF:FE5C:2880/64
gateway FE80::201:F4FF:FE5D:1234
B3(su)->clear ipv6 gateway
B3(su)->show ipv6 address
Name IPv6 Address
------------ ----------------------------------------
host FE80::201:F4FF:FE5C:2880/64
show ipv6 neighbors
UsethiscommandtodisplaythesystemIPv6NeighborDiscoveryProtocolcache.
Syntax
show ipv6 neighbors
Parameters
None.