Enterasys SecureStack B3

show snmp community
SecureStack B3 Configuration Guide 6-13
Example
Thisexampleshowshowtoclearallsettingsassignedtothe“public”userwithintheSNMPgroup
“anyone”:
B3(su)->clear snmp group anyone public
show snmp community
UsethiscommandtodisplaySNMPcommunitynamesandstatus.InSNMPv1andv2,
communitynamesactaspasswordstoremotemanagement.
Syntax
show snmp community [name]
Parameters
Defaults
Ifnameisnotspecified,informationwillbedisplayedforallSNMPcommunities.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayinformationabouttheSNMP“public”communityname.For
adescriptionofthisoutput,refertosetsnmpcommunity(page6‐13).
B3(su)->show snmp community public
--- Configured community strings ---
Name = *********
Security name = public
Context =
Transport tag =
Storage type = nonVolatile
Status = active
set snmp community
UsethiscommandtoconfigureanSNMPcommunitygroup.
Syntax
set snmp community community [securityname securityname] [context context]
[transport transport] [volatile | nonvolatile]
Parameters
name (Optional)DisplaysSNMPinformationforaspecificcommunityname.
community Specifiesacommunitygroupname.
securityname
securityname
(Optional)SpecifiesanSNMPsecuritynametoassociatewiththis
community.