Enterasys SecureStack B3

Using the Command Line Interface
SecureStack B3 Configuration Guide 1-9
Figure 1-5 Scrolling Screen Output
Abbreviating and Completing Commands
TheSecureStackB3switchallowsyoutoabbreviateCLIcommandsandkeywordsdowntothe
numberofcharactersthatwillallowforauniqueabbreviation.Figure 1‐6showshowto
abbreviatetheshownetstatcommandtoshnet.
Figure 1-6 Abbreviating a Command
Basic Line Editing Commands
TheCLIsupportsEMACs‐likelineedit ingcommands.Table 1‐2listssomecommonlyused
commands.
B3(su)->show mac
MAC Address FID Port Type
----------------------------------------------------------
00-00-1d-67-68-69 1 host Management
00-00-02-00-00-00 1 ge.1.2 Learned
00-00-02-00-00-01 1 ge.1.3 Learned
00-00-02-00-00-02 1 ge.1.4 Learned
00-00-02-00-00-03 1 ge.1.5 Learned
00-00-02-00-00-04 1 ge.1.6 Learned
00-00-02-00-00-05 1 ge.1.7 Learned
00-00-02-00-00-06 1 ge.1.8 Learned
00-00-02-00-00-07 1 ge.1.9 Learned
00-00-02-00-00-08 1 ge.1.10 Learned
--More--
B3(su)->sh net
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
----- ------ ------ --------------------- --------------------- -------
TCP 0 0 10.21.73.13.23 134.141.190.94.51246 ESTABLISHED
TCP 0 275 10.21.73.13.23 134.141.192.119.4724 ESTABLISHED
TCP 0 0 *.80 *.* LISTEN
TCP 0 0 *.23 *.* LISTEN
UDP 0 0 10.21.73.13.1030 134.141.89.113.514
UDP 0 0 *.161 *.*
UDP 0 0 *.1025 *.*
UDP 0 0 *.123 *.*
Table 1-2 Basic Line Editing Commands
Key Sequence Command
Ctrl+A Move cursor to beginning of line.
Ctrl+B Move cursor back one character.
Ctrl+D Delete a character.
Ctrl+E Move cursor to end of line.
Ctrl+F Move cursor forward one character.
Ctrl+H Delete character to left of cursor.
Ctrl+I or TAB Complete word.