Enterasys SecureStack B3

set lacp aadminkey
SecureStack B3 Configuration Guide 5-39
Syntax
set lacp asyspri value
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
LACPusesthisvaluetodetermineaggregationprecedence.Iftherearetwopartnerdevices
competingforthesameaggregator,LACPcomparestheLAGIDsforeachgroupingofports.The
LAGwiththelowerLAGID isgivenprecedenceandwillbeallowedtousetheaggregator.
Example
ThisexampleshowshowtosettheLACPsystempriorityto1000:
B3(su)->set lacp asyspri 1000
set lacp aadminkey
Usethiscommandtosettheadministrativelyassignedkeyforoneormoreaggregatorports.
Syntax
set lacp aadminkey port-string value
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
LACPwillusethisvaluetoformanoperkey.Onlyunderlyingphysicalportswithoperkeys
matchingthoseoftheiraggregatorswillbeallowedtoaggregate.Thedefaultadminkeyvaluefor
allLAGportsis32768.
asyspri SetsthesystemprioritytobeusedincreatingaLAG(Link
Aggregation
Group)ID.Validvaluesare0to65535.
value Specifiesasystempriorityvalue.Validvaluesare0to65535,with
precedencegiventolowervalues.
port‐string SpecifiestheLAGport(s)on whichtoassignanadminkey.
value Specifiesanadminkeyvaluetoset.Validvaluesare0to65535.The
defaultadminkeyvalueis32768.