Enterasys SecureStack B3

show diffserv service stats
9-16 Differentiated Services Configuration
show diffserv service stats
UsethiscommandtodisplayDiffservpolicyservicestatistics.
Syntax
show diffserv service stats {summary | detailed port-string} {in}
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayadetailedincomingtrafficstatisticsaboutserviceportge.1.1:
B3(rw)->show diffserv service stats detailed ge.1.1 in
Interface...................................... ge.1.1
Direction...................................... In
Operational Status............................. Up
Policy Name.................................... admin
Class Name..................................... system
In Discarded Packets........................... 0
set diffserv service
UsethiscommandtoaddorremoveaDiffservpolicytoincomingtrafficononeormoreports.
Syntax
set diffserv service {add | remove} {in} port-string policyname
Parameters
Defaults
None.
summary DisplaysDiffservasummaryofservicestatistics.
detailedport ‐string Displaysdetailedstatisticsforaspecificport.
in Displaysinformationaboutincomingtraffic.
add|remove Addsorremovesthespecifiedpolicy.
in Addsorremovesthespecifiedpolicytoincomingtraffic.
port‐string Specifiestheport(s)towhichthispolicyconfigurationwillbeapplied.
policyname Specifiesthepolicynametobeaddedtoorremovedfromporttraffic.