Enterasys SecureStack B3

Configuring Policy Class of Service (CoS)
10-18 Policy Classification Configuration
2.0 1 irl 1
2.0 2 irl none
2.0 3 irl none
...
2.0 97 irl none
2.0 98 irl none
2.0 99 irl none
4. IntheCoSsettingstable,configureaCoSsettingforCoSindex1,whichhasapriorityof0.We
entertheIRLreference,createdinthepreviousstep.
B3(su)->set cos settings 0 irl-reference 1
B3(su)->show cos settings
CoS Index Priority ToS IRL
--------- ---------- ------- -----
0 0 * 1
1 1 * *
2 2 * *
3 3 * *
4 4 * *
5 5 * *
6 6 * *
7 7 * *
Commands
For information about... Refer to page...
set cos state 10-19
show cos state 10-19
clear cos state 10-19
set cos settings 10-20
clear cos settings 10-21
show cos settings 10-22
set cos port-config 10-22
show cos port-config 10-24
clear cos port-config 10-24
set cos port-resource 10-25
show cos port-resource 10-26
clear cos port-resource 10-27
set cos reference 10-28
show cos reference 10-29
clear cos reference 10-29
show cos unit 10-30
clear cos all-entries 10-31
show cos port-type 10-31