406| Effects for the MIDI Sounds
Adjust the output level using the “Gain Adjust” parameter, since compres-
sion causes the entire level to be reduced.
Input Level
Output Level
Threshold
Ratio=1.0 : 1
Ratio=2.0 : 1
Ratio=4.0 : 1
Ration=Inf : 1
Louder
Louder
Level
Threshold
Ratio=Inf : 1
Ratio=2.0 : 1
Ratio=4.0 : 1
Dry
Ratio=1.0 : 1
Limiter - Threshold / Ratio
d: Attack
d: Release
These parameters set the attack time and release time. A higher attack time
will cause the compression to be applied more slowly.
Threshold
Ratio=Inf : 1
Attack=1
Release=1
Ratio=Inf : 1
Attack=100
Release=100
Dry
Wet
Wet
Release
Attack
Limiter - Attack / Release
To Next Page
Loading...
Need help?
General
