EasyManuals Logo

ST STM32WL5 Series User Manual

ST STM32WL5 Series
1461 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #311 background imageLoading...
Page #311 background image
RM0453 Rev 1 311/1461
RM0453 Reset and clock control (RCC)
364
Bits 31:10 Reserved, must be kept at reset value.
Bit 9 LSECSSC: LSE CSS flag clear
This bit is set by software to clear the LSECSSF flag.
0: No effect
1: LSECSSF flag cleared
Bit 8 CSSC: HSE32 CSS flag clear
This bit is set by software to clear the HSE32 CSSF flag.
0: No effect
1: HSE32 CSSF flag cleared
Bits 7:6 Reserved, must be kept at reset value.
Bit 5 PLLRDYC: PLL ready interrupt clear
This bit is set by software to clear the PLLRDYF flag.
0: No effect
1: PLLRDYF flag cleared
Bit 4 HSERDYC: HSE32 ready interrupt clear
This bit is set by software to clear the HSERDYF flag.
0: No effect
1: HSERDYF flag cleared
Bit 3 HSIRDYC: HSI16 ready interrupt clear
This bit is set software to clear the HSIRDYF flag.
0: No effect
1: HSIRDYF flag cleared
Bit 2 MSIRDYC: MSI ready interrupt clear
This bit is set by software to clear the MSIRDYF flag.
0: No effect
1: MSIRDYF flag cleared
Bit 1 LSERDYC: LSE ready interrupt clear
This bit is set by software to clear the LSERDYF flag.
0: No effect
1: LSERDYF flag cleared
Bit 0 LSIRDYC: LSI ready interrupt clear
This bit is set by software to clear the LSIRDYF flag.
0: No effect
1: LSIRDYF flag cleared

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ST STM32WL5 Series and is the answer not in the manual?

ST STM32WL5 Series Specifications

General IconGeneral
BrandST
ModelSTM32WL5 Series
CategoryMicrocontrollers
LanguageEnglish

Related product manuals