Sun Microsystems Blade 1500 - Diagnostic Tests Summary; TABLE 5-2 POST, Openboot Diagnostics, and Sunvts Tests Available for Components

Chapter 5 Introduction to Advanced Troubleshooting 5-3
5.3 Diagnostic Tests Summary
POST, OpenBoot PROM, and the SunVTS software offer tools which can help you
troubleshoot and diagnose problems with your Sun Blade 1500 workstation. Use
TABLE 5-2 to determine which diagnostic program to use to troubleshoot the
suspected component.
TABLE 5-2 POST, OpenBoot Diagnostics, and SunVTS Tests Available for Components
Component POST OpenBoot Diagnostics SunVTS
CPU module Performs cache, MMU,
CPU, and FPU tests
No testing cpu-unit0(cputest)
cpu-unit0(iutest)
cpu-unit0(fputest)
l1cache(l1dcachetest)
Memory Max diag level
performs tests
including block
memory and quick
memory tests
No testing mem(pmemtest)
kmem(vmemtest)
I/O bridge chip Performs several tests
including register tests
No testing No testing
Assorted
motherboard
components
No testing i2c@0,320
pmu@6
rtc@0,70
adm1031(env3test)
Flash PROM Verification of POST
portion checksum
flashprom@2,0 seeprom0(seepromtest)
Graphics accelerator No testing SUNW,XVR-600@3
SUNW,XVR-100@3
SUNW,XVR-1200@3
jfb0(jfbtest)
xvrtest(pfbtest)
jfb0(jfbtest)
PCI cards No testing Tests available if card has
IEEE 1275 self-test
Hard drive No testing ide@d c0t0d0(disktest)
Optical drive No testing ide@d c0t2d0s2(cddvdrwtest)
c0t2d0s2(cdtest)
c0t2d0s2(dvdtest)
Smart card reader No testing card-reader@0,40 scmi2c0(sc2test)
Network* No testing network@2 ce0(nettest)
bge0(netlbtest)