D-4 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
D.2.1 Scenarios for the Example Configuration
TABLE D-2 and TABLE D-3 help clarify the behavior of power management by
providing a timeline for two scenarios. For these situations, the previously described
example configuration is used. The first scenario describes what happens when the
user leaves for lunch.
The second scenario describes what happens when the user leaves for the day and
signs on from home.
TABLE D-2 First Scenario Timeline
Time Event
11:55 am User is typing at keyboard.
11:59 am User leaves to go to lunch.
12:14 pm Display goes to low-power mode.
12:29 pm Drive goes to low-power mode.
12:59 pm Entire system goes to low-power mode.
1:01 pm User returns from lunch and taps keyboard to bring system, drive,
and display to a normal state.
TABLE D-3 Second Scenario Timeline
Time Event
4:25 pm User logs out and leaves to go home.
4:40 pm Display goes to low-power mode.
4:55 pm Drive goes to low-power mode.
5:20 pm User logs in remotely. Drive and display return to a normal state.
7:53 pm User logs out.
8:00 pm Autoshutdown enabled.
8:08 pm Display goes to low-power mode.
8:15 pm System shuts down.
7:00 am Autoshutdown disabled, system restarts.
To Next Page
Loading...
