EasyManua.ls Logo

Sun Microsystems Blade 1500 - Warning Messages; Info Messages

Sun Microsystems Blade 1500
500 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-20 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual December 2004
7.4.2 Warning Messages
Warning messages have a structure similar to error messages, however the messages
are bounded by the text WARNING and END_WARNING. Warning messages do not
contain a Repair Instructions line.
The following warning message example indicates that there is a DIMM size
mismatch in slots DIMM0 and DIMM1:
DIMM0 is a 1 GB DIMM and DIMM1 is a 512 MB DIMM.
7.4.3 Info Messages
Info messages are simple and are only preceded by the text, INFO. Info messages
provide non-critical facts, as seen in this example:
These info messages indicate that a 1 GB DIMM is installed into each DIMM slot.
0>WARNING: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Memory
0>MSG = DIMM size does not match for dimm set 0, Dimm0=
00000000.40000000, Dimm1=00000000.20000000
0>END_WARNING
0>Probe and Setup Memory
0>INFO: 1024MB Bank 0, Dimm Type X4
0>INFO: 1024MB Bank 1, Dimm Type X4
0>INFO: 1024MB Bank 2, Dimm Type X4
0>INFO: 1024MB Bank 3, Dimm Type X4

Table of Contents

Related product manuals