9-10 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
9.3 Further SunVTS Testing
This chapter has provided only a brief overview of using the SunVTS software for
diagnosing component failure. For more information about the SunVTS software’s
functional and exclusive mode testing, refer to the SunVTS documentation described
in
“SunVTS Software” on page 5-6.
USB 8. Select USB
9. Click Reset.
10.Click Start.
13 seconds
TABLE 9-2 Steps to Test Components in Functional Mode (Continued)
Component Steps to Take
Approximate
Time for 1 Pass
To Next Page
Loading...
