15-8 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
15.4 Powering On the Workstation
This section describes powering on the workstation after finishing a service
procedure. Topics include:
■ “Reconnecting Power and External Peripherals” on page 15-8
■ “Choosing the Boot Mode” on page 15-10
Click this film icon to view an animated version of these instructions.
15.4.1 Reconnecting Power and External Peripherals
After completing any replacement procedure, the external cabling must be installed.
1. Reconnect the keyboard, mouse, monitor, and network connections.
See FIGURE 15-8.
To Next Page
Loading...
