7-12 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
7.3.4 post max min
The following is the output of POST with max diagnostic level and min output
verbosity. The duration of POST was 120 seconds.
POST conducted the tests, however, no output was provided.
7.3.5 post max normal
The following is the output of POST with max diagnostic level and normal output
verbosity. The duration of POST was 160 seconds. The left column of the table is the
output. The right column is information detailing what is happening. If the POST
output you see from your system does not match that in the left column, use the
information in the right column to help diagnose the problem.
0>IO-Bridge unit 1 interrupt test
I/O bridge interrupts are checked.
0>Print Mem Config
Memory configuration is to be
displayed.
0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
Cache status is displayed.
0>Memory interleave set to 0
0> Bank 0 1024MB : 00000000.00000000 -> 00000000.40000000.
4 megabyte portion of memory is
scrubbed and tested.
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
POST has passed successfully and
returns control to the OpenBoot
PROM.
ok post max min
Executing Power On Self Test
TABLE 7-6 post max normal Output Comparison
Output Displayed What Is Happening
ok post max normal
Executing Power On Self Test
POST is initiated.
0>@(#) Sun Blade[TM] 1500 POST 4.16.3 2004/11/05 19:58
POST build version and date is
displayed.
TABLE 7-5 post min max Output Comparison (Continued)
Output Displayed What Is Happening
To Next Page
Loading...
