D-6 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
D.3.2 Disabling All System Power Management
You can disable the power management feature by using the Dtpower application.
1. As superuser, open a terminal window and type the following command:
The Dtpower window is displayed on your screen.
2. From the Current Power Saving Scheme pulldown menu, select Disabled.
3. Click OK.
The application closes and power management is disabled. The display and drive
stay in normal-power mode and autoshutdown is disabled.
# /usr/dt/bin/dtpower
To Next Page
Loading...
