Sun Microsystems Blade 1500 - TABLE B-13 DB-9 out Stereoscopic Imager Interface Connector Pinouts; TABLE B-14 DB-9 in Stereoscopic Imager Interface Connector Pinouts

B-10 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
TABLE B-14 lists the pinouts of the DB-9 Out stereoscopic imager interface connector
TABLE B-14 lists the pinouts of the DB-9 In stereoscopic imager interface connector
2 5.0V (Fused, provides up to 300mA, limited to 1.0A)
3 12.0V (Fused, provides up to 300mA, limited to 1.0A)
4 Master stereo field Select Out
5 Slave stereo field Select In
6 No connect
7 No connect
TABLE B-13 DB-9 Out Stereoscopic Imager Interface Connector Pinouts
Pin Signal
1 3.3V (Fuse - 0.5A limit)
2 Ground
3 RefClk output
4 RefClk output
5 Ground
6 Release output
7 Pixel align output
8 Ground
9 Done output
TABLE B-14 DB-9 In Stereoscopic Imager Interface Connector Pinouts
Pin Signal
1 Slave sense
2 Ground
3 RefClk input
4 RefClk input
5 Ground
6 Release input
7 Pixel align input
TABLE B-12 Mini-DIN7 Stereoscopic Imager Interface Connector Pinouts (Continued)
Pin Signal