Sun Microsystems Blade 1500 - Probe-Ide Utility; Banner Utility

Chapter 8 OpenBoot PROM 8-3
8.1.3 probe-ide Utility
The probe-ide utility displays the manufacturer and model of devices attached to
the IDE buses. For example:
If no information regarding an installed device is displayed, check the cable
connections inside of the Sun Blade 1500 chassis.
8.1.4 banner Utility
The banner utility displays the banner seen during system startup. The banner
includes:
■ System model
■ Firmware version
■ Installed memory
■ Serial number
■ Ethernet address
■ Host ID
For example:
If the banner displays information that is suspect, there might be a problem with the
memory, NVRAM, or the motherboard flash PROM.
ok probe-ide
Device 0 ( Primary Master )
ATA Model: ST3120026A
Device 1 ( Primary Slave )
Not Present
Device 2 ( Secondary Master )
Removable ATAPI Model: LITE-ON COMBO SOHC-4832K
Device 3 ( Secondary Slave )
Not Present
ok banner
Sun Blade 1500 (Silver), Keyboard present
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.3, 1024 MB memory installed, Serial #53463596.
Ethernet address 0:3:ba:2f:ca:2c, Host ID: 832fca2c