Chapter 8 OpenBoot PROM 8-11
8.2.6.1 SUNW,XVR-600@3 Test
The following is an example of a successful SUNW,XVR-600@3 test:
8.2.6.2 card-reader@0,40 Test
The following is an example of a successful card-reader@0,40 test:
obdiag> test 1
Hit the spacebar to interrupt testing
Testing /pci@1f,700000/SUNW,XVR-600@3
Starting XV-600 Selftest
(This will take an estimated
2-4 minutes for the full test)
Direct access framebuffer test:
address test ovl0 pass
address test ovl1 pass
pattern test ovl0 00 ff a5 5a pass
pattern test ovl1 00 ff a5 5a pass
passed
Frame buffer color test:
The frame buffer will be painted with:
red in the top third
green in the middle third
blue in the bottom third.
Direct Burst memory test:
address test db mem pass
pattern test db mem 00 ff a5 5a pass
Selftest at /pci@1f,700000/SUNW,XVR-600@3 ............................. passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:20
obdiag> test 2
Hit the spacebar to interrupt testing
Testing /pci@1e,600000/pmu@6/i2c@0,0/card-reader@0,40
>> Smartcard Reader is attached
Selftest at /pci@1e,600000/pmu@6/i2c@0,0/card-reader@0,40 ............. passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
To Next Page
Loading...
