8-18 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
8.2.6.9 rtc@0,70 Test
The following is an example of a successful rtc@0,70 test:
8.2.6.10 serial@0,2e8 Test
The following is an example of a successful serial@0,2e8 test:
8.2.6.11 serial@0,3f8 Test
The following is an example of a successful serial@0,3f8 test:
obdiag> test 9
Hit the spacebar to interrupt testing
Testing /pci@1e,600000/isa@7/rtc@0,70
Subtest rtc-tick-test
Selftest at /pci@1e,600000/isa@7/rtc@0,70 ............................. passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:1
obdiag> test 10
Hit the spacebar to interrupt testing
Testing /pci@1e,600000/isa@7/serial@0,2e8
Subtest internal-loopback
BAUDRATE=115200
>> External Loopback Test not run. To run the test include
>> "loopback" in TEST-ARGS and connect external loopback to the device port.
Selftest at /pci@1e,600000/isa@7/serial@0,2e8 ......................... passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
obdiag> test 11
Hit the spacebar to interrupt testing
Testing /pci@1e,600000/isa@7/serial@0,3f8
>> Port is not tested because it is in use as a console device.
Selftest at /pci@1e,600000/isa@7/serial@0,3f8 ......................... passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
To Next Page
Loading...
